Steel Grade Stainless Steel Type In Coil Diameter Range 0.09mm -
0.2mm Thin Stainless Steel Wire
Product Information
Stainless steel wire, also known as stainless steel wire, is made
of stainless steel as raw material for various kinds of silk
products of different specifications and models. The cross section
is generally round or flat. The common stainless steel wires with
good corrosion resistance and high cost performance are 201, 304
and 316 stainless steel wires.
Selling points
1. It has strong heat resistance.
316 stainless steel no matter it is used intermittently at 1600 ℃
or continuously at 1700 ℃, there will not be any change, let alone
melting, which has obvious advantages compared with copper and
aluminum. Because of such advantages, it is widely used in the
metallurgical industry and has made great contribution to the
industry.
2. It has corrosion resistance.
Because his raw material is stainless steel, and stainless steel
contains carbon, manganese, nickel and other elements, after the
reaction in the air, it will form a protective film, which can
reduce the impact of the outside world on stainless steel.
Stainless steel is not easy to react with acid and alkali, and has
good corrosion resistance, so it will be found that stainless steel
wire plays a very extensive role in the paper industry and deep-sea
operators.
3. It has strong plasticity.
This property can make it into various shapes under the condition
of external force. This is a rare decorative material for
designers, because of its low hardness, it can be changed into
various shapes according to the demand, so as to achieve the
purpose of decoration, with a strong decorative effect. It is
precisely because it has obvious advantages compared with iron,
aluminum, copper, etc., so now people use it much more.
Material composition table
AISI Material | Chemical composition (%) |
| C | Si | Mn | P | S | Ni | Cr | Mo | Cu | Ti |
| 201 | ≤0.15 | ≤0.75 | 5.5~7.5 | ≤0.06 | ≤0.03 | 3.5~5.5 | 16~18 | - | - | - |
| 304 | <0.08 | <1.0 | <2.0 | <0.035 | <0.03 | 8~10 | 17~19 | - | - | - |
| 304L | <0.03 | <1.0 | <2.0 | <0.04 | <0.03 | 9~13 | 18~20 | - | - | - |
| 304HC | <0.06 | <1.0 | 1.2-1.8 | <0.035 | <0.03 | 8~11 | 17~19 | - | 2.0-3.0 | - |
| 316 | <0.08 | <1.0 | <2.0 | <0.04 | <0.03 | 10~14 | 16~18 | 2.0~3.0 | - | - |
| 316L | <0.03 | <1.0 | <2.0 | <0.04 | <0.03 | 12~15 | 16~18 | 2.0~3.0 | - | - |
| 310S | <0.08 | <1.5 | <2.0 | <0.04 | <0.03 | 19~22 | 24~26 | - | - | - |
| 321 | <0.08 | <1.0 | <2.0 | <0.045 | <0.03 | 9~13 | 17~19 | - | - | >0.035 |
| 301 | <0.15 | <1.0 | <2.0 | <0.04 | <0.03 | >7 | 16~18 | - | - | - |
| 302 | <0.15 | <1.0 | <2.0 | <0.04 | <0.03 | >8 | 17~19 | - | - | - |
| | | | | | | | | | |
Company Introduction
Anping longkuo wire mesh products Co., Ltd. is located in Anping
County, Hebei Province, which is the world's largest wire mesh
production base and has the reputation of "hometown of wire mesh"
in China. Our company specializes in producing all kinds of
stainless steel wire, stainless steel mesh and other series
products, with professional and technical personnel and senior
engineers, advanced production technology and strong R & D force.
